
FTP Motorsport B58N Charge Pipe - M340i / M440i (2025+)
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: 2025+ BMW M340i (G20) and M440i (G22/G23/G26) with the B58N engine (OE 13719455373)
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
The newer B58N engine still uses a plastic charge pipe that can go brittle and crack under boost. FTP designed this aluminum pipe specifically for the B58N, so you can raise boost without worrying about the stock part letting go.
What you get
- Aluminum pipe replacing the factory plastic one.
- Bigger bore than stock to cut turbulence and maximize flow.
- Bung for water injection.
- Three-ply silicone couplers.
Good to know
- Made for B58N engines built after 2023. It is not the same part as the earlier B58 charge pipes.
Brand: FTP Motorsport · Part #: sg71480
2025+ BMW M340i (G20) and M440i (G22/G23/G26) with the B58N engine (OE 13719455373)
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
B58 Charge Pipe Install: Gen 1 F-Chassis vs Gen 2 G-Chassis and the GR Supra
The B58 charge pipe runs from the turbo outlet to the throttle body. Swapping it is a top-side job on most cars: pull the intake, unclip the pipe from the turbo, unbolt it from the throttle body, move the sensors and O-r
B58 Intercooler Install: Heat Exchanger Upgrade for Gen 1 F-Series, Gen 2 G-Series and the GR Supra
Every B58 uses an air-to-water intercooler. That includes the Gen 1 F-series BMWs, the Gen 2 G-series BMWs and the GR Supra. The intercooler itself sits inside the intake manifold, and a small radiator up front, called t
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with

FTP Motorsport Charge Pipe + Intake Pipe Combo - X3/X4 M40i Gen 2 (2020+)

FTP Motorsport Reinforced Silicone Hose for B58 Charge Pipe

FTP Motorsport Charge Pipe + Intake Pipe Combo - X3/X4 M40i (2018–2020)

