Forge Motorsport Toyota Supra A90 Boost Pipes (B58 Engine)
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
The factory Supra charge pipe is soft plastic. It's fine at stock boost, but it gets brittle with heat and age and can split once boost goes up, leaving you with a boost leak. Forge's kit swaps it for black-coated 6061 aluminum in the factory location, with a larger bore so air reaches the intake with less turbulence.
What you get
- 6061 aluminum pipe with a black powder-coat finish, in place of the factory plastic one.
- Larger diameter than stock for less turbulence and quicker throttle response.
- Two 1/8" NPT bosses for water-methanol injection, or for a boost gauge line (adapter not included).
- Silicone reducing coupler, all hardware and instructions in the box.
Good to know
- Fits in the factory location as a direct replacement.
Brand: Forge Motorsport · Part #: FMBP5
Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
B58 Charge Pipe Install: Gen 1 F-Chassis vs Gen 2 G-Chassis and the GR Supra
The B58 charge pipe runs from the turbo outlet to the throttle body. Swapping it is a top-side job on most cars: pull the intake, unclip the pipe from the turbo, unbolt it from the throttle body, move the sensors and O-r
B58 Intercooler Install: Heat Exchanger Upgrade for Gen 1 F-Series, Gen 2 G-Series and the GR Supra
Every B58 uses an air-to-water intercooler. That includes the Gen 1 F-series BMWs, the Gen 2 G-series BMWs and the GR Supra. The intercooler itself sits inside the intake manifold, and a small radiator up front, called t
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Pairs well with
Wagner Tuning Aluminum Charge Pipe - Toyota GR Supra (A90)
CTS Turbo Heat Exchanger - Toyota GR Supra / BMW G-Series B58
G Series/Supra High Performance Heat Exchanger
