Dorch Low Pressure Hose Collar Nut (5/16 or 3/8)
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: Dorch HPFP kits on Gen 1 and Gen 2 B58 (BMW and Toyota GR Supra)
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
A replacement billet collar nut for Dorch's quick-disconnect hose fittings.
Good to know
- Blue, 5/16 in: the smaller fitting, used at most factory hardline connections.
- Black, 3/8 in: the larger fitting, used at DS1/DS2 pump inlets and ethanol sensors.
- They're only for Dorch hose assemblies.
Brand: Dorch Engineering · Part #: DE-CN, DE-CN516, DE-CN38
Dorch HPFP kits on Gen 1 and Gen 2 B58 (BMW and Toyota GR Supra)
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
B58 Fueling Explained: HPFP, LPFP, Port Injection, Flex Fuel and E85
The B58 fuel system has two pumps. The low-pressure pump (LPFP) in the tank feeds the high-pressure pump (HPFP) on the engine, which feeds the direct injectors. On a tuned car, the HPFP is usually the first wall, and eth
B58 HPFP Install: Gen 1 F-Chassis, Gen 2 B58TU and the GR Supra
The B58's high-pressure fuel pump (HPFP) bolts to the back of the valve cover, by the firewall. You disconnect the battery, bleed off the pressure by slowly cracking the 17 mm line nuts into rags, then remove the lines,
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with
Dorch B58 Low Pressure Hose Hold-Down Bracket
Dorch SAE Quick Disconnect Adapter - Female 3/8 to 5/16
Dorch HPFP O-Ring (Replacement)
