Whiteline KCA495 Front Radius Arm to Frame Bushing For Toyota GR Supra 20+
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
This Whiteline caster kit replaces the bushing where the front radius arm meets the frame on the GR Supra. Its offset design adds caster, which gives the steering more weight and feel, helps the car track straight, and adds negative camber as the car rolls into a corner.
What you get
- Offset bushings that increase static caster for a heavier, more precise steering feel.
- More camber gain in roll, keeping more tire on the road when cornering.
- Better straight-line stability and quicker turn-in.
- Less alignment change under load, which also helps under braking.
- Two bonded shell bushings and two tubes in the kit.
Brand: Whiteline · Part #: KCA495
Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with
KW Electronic Damping Cancellation Kit BMW Z4 sDrive M40I / A90 Toyota Supra
034Motorsport Front Rotor Ring Set - BMW M340i (G20) / GR Supra (A90)
034Motorsport Rear Rotor Ring Set - BMW M340i (G20) / GR Supra (A90)
