SPL Parts Front Caster Rod Bushings (Non-Adj.) - Toyota Supra A90 / BMW Z4 G29
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: BMW Z4 M40i (G29); Toyota GR Supra 3.0 (A90/A91) (B58).
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
The front caster rods on the Supra and Z4 locate the wheel under braking, and the factory rubber bushings in them flex when the car is driven hard. SPL replaces that rubber with spherical bearings, so the front geometry stays put and the car gives clearer feedback under braking and in corners.
What you get
- FK spherical bearings, 1 inch, with self-lubricating Teflon liners.
- 6061-T6 aluminum bearing housings with a knurled outer surface.
- Fixed caster. These are the non-adjustable version and keep factory caster.
- Sold as a pair, one for each side.
Good to know
- Made in the USA.
- SPL also makes an adjustable version if you want to change caster.
Brand: SPL Parts · Part #: SPL CRBN G29
Ships from the brand or distributor, usually in 3-7 business days.
BMW Z4 M40i (G29); Toyota GR Supra 3.0 (A90/A91) (B58).
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with
Hawk Performance 21-24 Toyota GR Supra 3.0L HPS 5.0 Brake Pads
ST Adjustable Lowering Springs Toyota GR Supra (A90) w/ Electronic Dampers
Hawk Performance 21-24 Toyota GR Supra 3.0L DTC-60 Race Front Brake Pads
