PFS Upgraded LPFP Line - GR Supra (A90/A91)
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: Toyota GR Supra 3.0 (A90/A91)
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
This PFS line replaces the Supra's factory low-pressure fuel feed between the tank and the hard line under the driver's footwell. It follows the stock routing and clips into the factory line holders, so the install is plug and play.
What you get
- Parker 801-6 hose with a 10 mm inside diameter.
- More flow area. Stock, the line is a little under 8 mm inside, so this one has about 22% more diameter and 56% more cross-sectional area.
- Tank-to-hard-line replacement in the factory path.
- Fits the factory line holders.
Good to know
- PFS recommends it alongside its brushless LPFP upgrade.
Brand: PFS · Part #: PFS-A90-LPFP-LINE
Toyota GR Supra 3.0 (A90/A91)
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
B58 Fueling Explained: HPFP, LPFP, Port Injection, Flex Fuel and E85
The B58 fuel system has two pumps. The low-pressure pump (LPFP) in the tank feeds the high-pressure pump (HPFP) on the engine, which feeds the direct injectors. On a tuned car, the HPFP is usually the first wall, and eth
B58 HPFP Install: Gen 1 F-Chassis, Gen 2 B58TU and the GR Supra
The B58's high-pressure fuel pump (HPFP) bolts to the back of the valve cover, by the firewall. You disconnect the battery, bleed off the pressure by slowly cracking the 17 mm line nuts into rags, then remove the lines,
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Pairs well with
PFS B58 Port Injection Kit
VTT Billet B58/S58 HPFP Block-Off Plates
PFS Drop-In Brushless LPFP Upgrade - GR Supra / G-Series BMW
