MMX Performance Charge Pipe Kit for B58 F20/F30 M140/M240/340/440
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: BMW M140i (F20), M240i (F22), 340i (F30), 440i (F32). Confirm your exact car with us before ordering.
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
The factory charge pipes on the F-series B58 can split or crack once boost goes up. MMR's kit replaces them with lightweight aluminum pipes that hold up at much higher outputs, and their smooth bore and resistance to flexing under load help airflow and throttle response.
What you get
- Two high-flow aluminum charge pipes with CNC-machined, leak-free connections.
- Crinkle-black finish with laser-etched MMR logos.
- Direct replacement for the factory pipework.
- 1/8-inch bung for adding water or methanol injection.
- Install parts included: a silicone coupler, four hose clamps, an O-ring gasket, a C-clip and throttle body bolts.
Brand: MMX · Part #: MMR02-0503
BMW M140i (F20), M240i (F22), 340i (F30), 440i (F32). Confirm your exact car with us before ordering.
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
B58 Charge Pipe Install: Gen 1 F-Chassis vs Gen 2 G-Chassis and the GR Supra
The B58 charge pipe runs from the turbo outlet to the throttle body. Swapping it is a top-side job on most cars: pull the intake, unclip the pipe from the turbo, unbolt it from the throttle body, move the sensors and O-r
B58 Intercooler Install: Heat Exchanger Upgrade for Gen 1 F-Series, Gen 2 G-Series and the GR Supra
Every B58 uses an air-to-water intercooler. That includes the Gen 1 F-series BMWs, the Gen 2 G-series BMWs and the GR Supra. The intercooler itself sits inside the intake manifold, and a small radiator up front, called t
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with
CSF BMW Gen 1 B58 Charge Air Cooler Manifold - Thermal Dispersion Black
do88 Charge Cooler Manifold - BMW F-Series B58 (ICM-440-K)
do88 MERA Charge Cooler Manifold - BMW F-Series B58 (ICM-440-G)
