
Eibach Pro-Alignment Rear Camber Arms for 2020+ Toyota Supra
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
Once a Supra is lowered, rear camber often ends up outside the range the factory arms can correct, and the inside edges of the tires wear out early. Eibach's Pro-Alignment arms replace the stock rear camber arms with adjustable ones, so the car can be aligned properly for the street or set up with more camber for the track.
What you get
- Adjustable rear camber arms that replace the factory arms.
- A wider camber range than the stock parts allow.
- Precise alignment control, which helps prevent uneven tire wear.
Good to know
- Eibach's instructions have you set each arm to the length of the factory arm before installing it. Get a full alignment afterward.
Brand: Eibach Springs · Part #: AC41-82-089-01-02
Toyota GR Supra 3.0 (A90/A91). Confirm your exact car with us before ordering.
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with

034Motorsport 2-Piece Floating Rear Brake Rotor Kit - BMW M340i (G20) / GR Supra

Whiteline BTK009 Front (24mm) & Rear (18mm) Swaybar Kit fits Toyota Supra 20+

Eibach 2020+ Toyota Supra Front & Rear Anti-Roll Sway Bar Kit

