EBC 2019+ Toyota GR Supra (w/13.6in Rear Rotor) Redstuff Rear Brake Pads
Ships from the brand or distributor, usually in 3–7 business days
Make sure this fits your car
Fits: BMW M340i (G20), M240i (G42), Z4 M40i (G29); Toyota GR Supra 3.0 (A90/A91) (B58).
- Shipping at real carrier rates
- 30-day returns on unused parts
- Fitment help before you buy
Redstuff is EBC's fast-road pad, made from a synthetic fiber compound with ceramic particles. It bites well from cold, gets better as it heats up, and makes far less dust than a semi-metallic pad. This set is for the rear of the GR Supra with the 13.6 in rear rotor.
What you get
- Ceramic-enhanced Redstuff compound with a nominal friction coefficient of 0.5.
- Low dust that washes off easily, since the compound has no steel fibers.
- EBC Brake-In coating to help the pads bed in faster.
Good to know
- EBC says bed-in can take up to about 1,000 miles while the pad matches the rotor.
- Check that your Supra has the 13.6 in rear rotor before ordering.
Brand: EBC · Part #: DP32415C
Ships from the brand or distributor, usually in 3-7 business days.
BMW M340i (G20), M240i (G42), Z4 M40i (G29); Toyota GR Supra 3.0 (A90/A91) (B58).
| Model | Chassis | Years | Engine | Fits |
|---|---|---|---|---|
| M140i | F20/F21 | 2016–2019 | Gen 1 B58 | |
| M240i | F22/F23 | 2016–2021 | Gen 1 B58 | |
| 340i | F30/F31/F34 | 2016–2019 | Gen 1 B58 | |
| 440i | F32/F33/F36 | 2017–2020 | Gen 1 B58 | |
| 540i | G30/G31 | 2017–2019 | Gen 1 B58 | |
| 740i | G11/G12 | 2016–2019 | Gen 1 B58 | |
| X3 M40i | G01 | 2018–2019 | Gen 1 B58 | |
| X4 M40i | G02 | 2019 | Gen 1 B58 | |
| 640i GT | G32 | 2018–2019 | Gen 1 B58 | |
| M340i | G20/G21 | 2019–2024 | Gen 2 B58 (TU) | |
| M440i | G22/G23/G26 | 2021–2024 | Gen 2 B58 (TU) | |
| M240i | G42 | 2022–2024 | Gen 2 B58 (TU) | |
| Z4 M40i | G29 | 2019+ | Gen 2 B58 (TU) | |
| GR Supra 3.0 | A90/A91 | 2020+ | Gen 2 B58 (TU) | |
| 540i | G30/G31 | 2020–2023 | Gen 2 B58 (TU) | |
| 740i | G11/G12 | 2020–2022 | Gen 2 B58 (TU) | |
| X3 M40i | G01 | 2020+ | Gen 2 B58 (TU) | |
| X4 M40i | G02 | 2020+ | Gen 2 B58 (TU) | |
| X5 xDrive40i | G05 | 2019–2023 | Gen 2 B58 (TU) | |
| X6 xDrive40i | G06 | 2020–2023 | Gen 2 B58 (TU) | |
| X7 xDrive40i | G07 | 2019–2022 | Gen 2 B58 (TU) | |
| 840i | G14/G15/G16 | 2019+ | Gen 2 B58 (TU) | |
| INEOS Grenadier | Station Wagon/Quartermaster | 2023+ | Gen 2 B58 (TU) | |
| M340i | G20/G21 | 2025+ | Gen 3 B58 (48V) | |
| M440i | G22/G23/G26 | 2025+ | Gen 3 B58 (48V) | |
| M240i | G42 | 2025+ | Gen 3 B58 (48V) |
Not sure? Email sales@b58racing.com with your VIN.
- Ships from the brand or distributor, usually in 3–7 business days.
- Shipping is charged at the carrier's rate, shown at checkout. Orders over 70 lb ship by freight for a flat $99.
- Unused parts can be returned within 30 days. Some items are marked no-refund in their description.
Full details are on our shipping and returns page.
Guides for this part
Best A90 Supra Mods, In the Order to Do Them (GR Supra 3.0)
Tune it first. On a GR Supra 3.0, a flash tune or a JB4 is the biggest gain per dollar. Next, add a downpipe and a Stage 2 map, and a better heat exchanger so the car stays strong on hot days. After that comes fuel: flex
Best B58 Mods, In the Order to Do Them
Start with a tune. It is the biggest gain per dollar on any B58. Then add a downpipe and a Stage 2 map, then an upgraded high-pressure fuel pump (HPFP) and an ethanol blend. Only after that should you think about a bigge
Pairs well with
Dinan Wheel Spacers - 5x112 - 66.5mm CB - 12mm Thick (Set of 2)
H&R Sport Springs - 2020-22 Toyota GR Supra 3.0 / Premium / Launch Edition A90
Dinan Wheel Spacers - 5x112 - 66.5mm CB - 5mm Thick (Set of 2)
